1917 Nash WTB wheel rim

I have a1917 Nash and need another wheel locking rim rim 36 x6 tyres. They have th erim th etyre sits on and then two locking rings one complete ring( like a circle ) and a locking spring ring ( it has a small gap of 2cms which has locking notches on each end , I am looking for the complete ring

I understood Melonreo might have known something but havn't heard back from him, anybody else got any suggestions ??

Try
ELFLINT PTY/LTD at Helidon Qld on phone 07 46976462 for new ones.


Jake

Nr Mack

Are they like the international rims mid 20's.

Picture shows the main centre section which is split, then the 2 solid rings which are the bead area, and then the split locking ring which goes on the inside to lock rim to centre spider/hub.



Trevor

yes that is right main rim which is split and the outer lock rings of which the complete one is the one I need

can you help with one 24inch diameter
thankyou
Chester

Chester

I will measure one up tomorrow and take some more detailed photos.

Trevor

Chester

I will measure one up tomorrow and take some more detailed photos.

Trevor

Hi trevor any luck?

Chester

The rings i have got are only 20" ID and 22.5" OD these fit a 7.00/7.50-20 tyre.

If you have got one that you can copy from any good Engineering Machine Shop would be able to roll you up a ring or Lazer cut one and then machine it.

Trevor

thanks
the tyre size is 36 x6 or 24 inch rim so I may give a machine shop a go thankyou for your help