Skip to main content

Wiring loom diagram At4-114

More
9 years 6 months ago #150172 by fixxer
Hey. Hoping to see if anyone has a wiring diagram for a '62 AT4-114 hemi 6.
I seem to have a disproportionate number of male snd female plugs, any help greatly appreciated.
Cheers

Please Log in to join the conversation.

More
9 years 6 months ago - 9 years 6 months ago #150173 by Dodge fred
62 should be 225 slant oil pressure and temp are mechanical gauges, trying to scan a copy but scanner wont work, Sorry
Last edit: 9 years 6 months ago by Dodge fred.

Please Log in to join the conversation.

More
9 years 6 months ago #150174 by fixxer
Yes, you are correct. 225 slant.
I have operational oil and temp, non operational amp and fuel. I have to now hook up all starter, coil, alternator, regulator, brake light lines, which were all removed in last build up.
I have inspected under dash and only have a few left to decipher.
I have going to the alt /coil area a blue wire with eyelet, a heavy red with eyelet and dk green with female spade.
I have a green wire out of the regulator and a spare red small wire right up on the firewall near brake master. One is for the brake lights, spare is for??
Also have 3 wires inside near centre outlet to firewall. Don't look to have ever been used, very corroded.

Up til now I have bypassed all engine bay wiring and run the engine off the battery, but it makes starting and stopping difficult :o

Any help greatly appreciated.
Cheers

Please Log in to join the conversation.

More
9 years 6 months ago #150175 by Dodge fred
Blue is coil, red is alternator charge wire, green is alternator field wire/reg wire. Green wire out of reg is to alternator, should be a tan and a yellow wire on the reg , yellow is power from ignition switch on position, tan is power to the balist resister. hope that helps.

Please Log in to join the conversation.

More
9 years 6 months ago #150176 by AT4114
Hi fixxer hope this helps cheers Bryant ;)

http://i.imgur.com/UiRCpoJ.jpg?2
http://i.imgur.com/j9Vzabs.jpg?1
http://i.imgur.com/SD2bpQW.jpg?1

Please Log in to join the conversation.

More
9 years 6 months ago #150177 by fixxer
Thanks Fred and Bryant.

That will certainly go along way to solving my issues.
Will be nice to start and stop with a key :)
Appreciate your help,
I'm about to do a new post with a few spares I have.
Before I do, do you need a brake and clutch master set?
Window winders ? I have a box other small bits as well, came with the truck.
Let me know if you need anything. Happy to send- you only pay postage.


Please Log in to join the conversation.

More
9 years 6 months ago #150178 by AT4114
Thanks fixxer I appreciate your generous offer :) hope you get the dodge sorted will let you know if I'm after any bits cheers Bryant

Please Log in to join the conversation.

Time to create page: 0.421 seconds