Air Wiper motors

Hi guys, does anyone have any ideas on left hand air wiper motor for my K124 '78 model. Back housing where the hoses connect to adaptors has been broken & I either need a new motor (expensive) or hopefully parts to repair the existing motor. Cheers Tim

Hi Tim, can you take a few pics of the Air Wiper Motors so we all can have a look to see if they are the same as a White Road Commander.
I purchased NOS Wipers from the USA that where on Ebay for my 1978 White Road Commander.
Tim, I do have a few air wiper motors in bits and there might be the right parts you need.
Cheers Ray

G'day Ray, thanks for the reply Mate, I've just got to get the motor out of the dash, will probably get it out this arvo ( if the rain lets up) Where the air intake hose connects to the valve gear it's all broken away & it just pi$$es air out there. I'm hoping that all I'll need is the valve body part of it. I'll post piccies as soon as I can. Also at this stage I can't see any identification on the existing motor. cya Tim

Hi Tim, I got my air wiper motor (for my B61) repaired by some guy at Heidelberg, Vic. Would you like me to dig out his details? Rod.

Rod, thanks for the offer Mate, if you can find the details that would be much appreciated. cya Tim

Tim. Can't put my hands on the old receipt now, but found these;
www.speedscreen.com.au/trico.html
and
Air Wiper Motor Repairs Service
Truck & Bus Repairs - Cranbourne North, VIC
(03) 5996 9504
Address
11 Hazelwood Ave, Cranbourne North VIC 3977, Australia

Regards, Rod.

Tim , listen to ya mate choc,s and put an electric conversion in! air was R.S when they were new, "jeep goes straight in", that's what the s2 is getting

Cheers Adam

more info on the jeep stuff as i am wanting to put electric in my 4300 tranny..... really trying to avoid putting air wipers back in :

i have purchased 1 wiper out of a CH $mack ,i think from memory,,, it seem to be about the smallest ive seen about , i was going to mount it in the top on the left side and build a linkage system to run across to the other side, not much room up in there. i am wanting to keep them in time and have both arms at the top at the same time,ive pretty well got it nutted ,just need to do it , but as we all know get it done and somehow a real easy solution pops up[ after you finnish the job

WHAT---the sash cord is not standard
> dam i thought i could read a part no on it