Skip to main content

KW SAR rebuild

More
12 years 11 months ago #52862 by sar77
Replied by sar77 on topic Re: KW SAR rebuild
Thanks Swishy,

Something to think about

Cheers Darryl

Please Log in to join the conversation.

More
12 years 11 months ago #52863 by PeterbiltMech
Replied by PeterbiltMech on topic Re: KW SAR rebuild
correct me if im wrong but i thought the GM 2stroke SAR's had the bump in the floor/firewall?? :-/

Please Log in to join the conversation.

More
12 years 11 months ago #52864 by sar77
Replied by sar77 on topic Re: KW SAR rebuild
HI Peterbiltmech,

As far as I know GMs in SAR'S had flat floors and cummins and cats 6 cylinders had the bump

Darryl

Please Log in to join the conversation.

More
12 years 11 months ago #52865 by PeterbiltMech
Replied by PeterbiltMech on topic Re: KW SAR rebuild
Ah righto i had my info back to front there ;)

Cheers mate
Luke

Please Log in to join the conversation.

  • Swishy
  • Away
  • If U don't like my Driving .... well then get off the footpath ...... LOL
More
12 years 11 months ago #52866 by Swishy
Replied by Swishy on topic Re: KW SAR rebuild

Guyz
Now U can correct me where eye B rong
eye'd like to believe th@ all the early SAR KW trucks had the Hump / Hob in the floor
but with 'V' motors it aint required
Later V: of the SAR only had the hob for straight 6 motors (me thinks)
The hob is a pain coz under the clutch pedal is a raised part of the floor
so we eventually flung our hob n went to a flat floor
Cya
[ch9787]
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST

There's more WORTH in KENWORTH

Please Log in to join the conversation.

More
12 years 11 months ago #52867 by PeterbiltMech
Replied by PeterbiltMech on topic Re: KW SAR rebuild

the SAR only had the hob for straight 6 motors (me thinks)
[ch9787]


that would make perfect sense swishy :)

cheers
luke

Please Log in to join the conversation.

12 years 11 months ago #52868 by
Replied by on topic Re: KW SAR rebuild
Old mate swishy is right again, my s2 has the hob, its v692 and my S.A.R. has the hobb too, its 871,Both trucks dont require it, but its there from the factory ;)

Please Log in to join the conversation.

More
12 years 11 months ago #52869 by paul404
Replied by paul404 on topic Re: KW SAR rebuild
So where is the pics of this mystery beast Adam??

Please Log in to join the conversation.

12 years 11 months ago #52870 by
Replied by on topic Re: KW SAR rebuild
No mystery Paul, put them up long time back , :)

www.hcvc.com.au/forum/YaBB.pl?num=1295684680

Please Log in to join the conversation.

12 years 11 months ago #52871 by
Replied by on topic Re: KW SAR rebuild
i snipped this off choc,s last week! no jumpin to conclusions

[IMG

Please Log in to join the conversation.

Time to create page: 0.446 seconds