- Posts: 39
- Thank you received: 0
I now own a D1310 HELP
15 years 6 months ago #4956
by Rookie
Replied by Rookie on topic Re: I now own a D1310 HELP
Second thought, KBS is cheaper than POR and make a epoxy putty which may do the trick.
www.kbs-coatings.com.au/KBS-NuMetal-Epoxy-Putty_p_0-21.html
www.kbs-coatings.com.au/KBS-NuMetal-Epoxy-Putty_p_0-21.html
Please Log in to join the conversation.
- Topic Author
15 years 6 months ago #4957
by
Replied by on topic Re: I now own a D1310 HELP
Barry i will put in touch with Neil who did my two at Sandown when you come over. Dave
Please Log in to join the conversation.
15 years 6 months ago #4958
by Bono
Replied by Bono on topic Re: I now own a D1310 HELP
Thx Dave,
Works a treat now.
Cheers Bono.
Works a treat now.
Cheers Bono.
Please Log in to join the conversation.
15 years 6 months ago #4959
by Bono
Replied by Bono on topic Re: I now own a D1310 HELP
Speaking of the 345, would you guys know of the
points gap
spark plug gap
timing spec for this motor.
Shes running reall y rough at the moment.
Cheers Bono.
points gap
spark plug gap
timing spec for this motor.
Shes running reall y rough at the moment.
Cheers Bono.
Please Log in to join the conversation.
15 years 6 months ago #4960
by atkipete
Replied by atkipete on topic Re: I now own a D1310 HELP
Gday Bono,
From info I have, plug gap = 25 to 30 thou points gap = 14 to 16 thou dwell angle = 28 to 32 deg, timing setting 4 deg BTC
Cheers Pete
From info I have, plug gap = 25 to 30 thou points gap = 14 to 16 thou dwell angle = 28 to 32 deg, timing setting 4 deg BTC
Cheers Pete
Please Log in to join the conversation.
Time to create page: 0.437 seconds