Dodge Crown wheel and pinion wanted
3 years 2 weeks ago #220331
by Lang
Dodge Crown wheel and pinion wanted was created by Lang
Wanted 40/50's Dodge 4.3 ratio crown wheel and pinion. I believe these were on the "D" series but could have been on other models. To suit 1/2 to 1 1/2 ton vehicles. Prefer new but second hand OK with a bit of wear or corrosion as it is going in front axle of 4x4.
Lang
Lang
Please Log in to join the conversation.
Time to create page: 0.389 seconds