Updated 28th July.

If you are unable to login, you probably need to read this change to your username & profile.

 

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Mack Midliner Beavertail and crane 03 Aug 2022 15:03 #237941

  • Lang
  • Lang's Avatar Topic Author
  • Offline
  • Posts: 6647
  • Thank you received: 6943
I have decided to sell my Mack Midliner. Finally facing reality that it is a set up far beyond what I am wanting at this stage in life. I will swap or trade on a pre-1994 tilt tray truck or $14,000 for the whole outfit, crane, tray and truck.

1985 Mack Midliner 265hp, 10 speed shift. Cab recently repainted in good condition. Interior needs a clean up and all it needs to get on the road is rewiring - no computers or fancy electronics. Excellent tyres, brakes. Power take-off and hydraulic pump. A lot spent on the brake and gear shift air systems. I have only driven this on the road about 50km since buying to make my perfect outfit but it ran beautifully. The ride is smooth European not rough American.

6 metre beaver tail tray, very straight and rust free with ramps OR very straight 5 metre flat standard steel tray (the one the crane is sitting on).

Atlas crane , made in UK, self contained with legs and hydraulic tank ready to drop straight on to any truck. 5 ton at 2 metres with long reach 1.3 ton at 6.5 metres. Very low hours in good condition Full workshop and parts manual for the crane.

Situated Brisbane. As is where is may be able to help with loading. You could have this outfit assembled in a few days plus the wiring.
Attachments:
The following user(s) said Thank You: cobbadog, PaulFH, Tassie Dan

Please Log in to join the conversation.

Last edit: by Lang.

Mack Midliner Beavertail and crane 03 Aug 2022 15:05 #237942

  • Lang
  • Lang's Avatar Topic Author
  • Offline
  • Posts: 6647
  • Thank you received: 6943
Attachments:
The following user(s) said Thank You: PaulFH

Please Log in to join the conversation.

Last edit: by Lang.

Mack Midliner Beavertail and crane 03 Aug 2022 21:21 #237954

  • hayseed
  • hayseed's Avatar
  • Offline
  • Posts: 4864
  • Thank you received: 1438
Lang, that'd be a very handy Toy Collector/Gatherer....

PS: Where will you Park the Jetski...??
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -

Please Log in to join the conversation.

Last edit: by hayseed.

Mack Midliner Beavertail and crane 04 Aug 2022 07:13 #237965

  • Lang
  • Lang's Avatar Topic Author
  • Offline
  • Posts: 6647
  • Thank you received: 6943
No Jet Ski just a rubber duck to go with the trailerable houseboat you can see behind.
The following user(s) said Thank You: cobbadog

Please Log in to join the conversation.

Mack Midliner Beavertail and crane 08 Aug 2022 20:42 #238157

  • Lang
  • Lang's Avatar Topic Author
  • Offline
  • Posts: 6647
  • Thank you received: 6943
I have found a likely tilt tray.

Mack reduced to $12,500 now includes both beavertail and flat tray.

Lang
The following user(s) said Thank You: cobbadog, PaulFH

Please Log in to join the conversation.

Mack Midliner Beavertail and crane 09 Aug 2022 07:37 #238166

  • Lang
  • Lang's Avatar Topic Author
  • Offline
  • Posts: 6647
  • Thank you received: 6943
Some more photos









Attachments:
The following user(s) said Thank You: cobbadog, Tassie Dan

Please Log in to join the conversation.

Last edit: by Lang.
  • Page:
  • 1
Time to create page: 0.384 seconds

Historic Commercial Vehicles Club of Australia Inc.  Post: P.O. Box 2020 Bayswater Vic. 3153    Clubrooms: Unit 8 / 4  Macquarie Place Boronia    Club Rooms:  03) 9738 1558