Skip to main content

Load Binders Dogs

More
2 years 3 weeks ago #240876 by Hi Beam
Load Binders Dogs was created by Hi Beam
Went to a garage sale last week. Bloke had a Wog Dog, AKA Railway dog. Anyone got a photo? What if any was their correct name? Hadn't seen one for 40 years.

Please Log in to join the conversation.

More
2 years 3 weeks ago #240882 by myflint69
Replied by myflint69 on topic Load Binders Dogs
If it's what I think your refering to , they were known as an Oyster Dog, a round looking main body that was tightened with a steel bar rather than a pipe, clumsy and the claws were not like the claws of a Oregan dog or similar type of pulldown dog.

1969 Mack R600.
1969 C1600 Inter.
1964 MF 35 Tractor.
The following user(s) said Thank You: Hi Beam, 180wannabe, PaulFH

Please Log in to join the conversation.

More
2 years 3 weeks ago #240884 by Mrsmackpaul
Replied by Mrsmackpaul on topic Load Binders Dogs
I think I know what you're talking about

All fabricated, I have a couple some were

Paul

Your better to die trying than live on your knees begging

Please Log in to join the conversation.

More
2 years 3 weeks ago #240892 by cobbadog
Replied by cobbadog on topic Load Binders Dogs
I am totally lost on this one. It is like it is all in code.

Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.

Please Log in to join the conversation.

More
2 years 3 weeks ago #240894 by Lang
Replied by Lang on topic Load Binders Dogs
  • The following user(s) said Thank You: cobbadog, PaulFH

    Please Log in to join the conversation.

    More
    2 years 3 weeks ago - 2 years 3 weeks ago #240897 by Hi Beam
    Replied by Hi Beam on topic Load Binders Dogs
    Yes that is exactly what I am talking about. Very good description. Thanks
    I have had to edit this to refer to the description of an ''Oyster Dog'' They were magic when carting sawn timber under tarps as you didn't have to undo as many ropes to tighten the chains. One disadvantage was that you needed a really tough bar to get them tight, VW torsion bars were the best. One huge advantage was no one pinched them
    Last edit: 2 years 3 weeks ago by Hi Beam. Reason: I had meant to reply to myflint 69 but my comment came after Langs and did not make sense there.
    The following user(s) said Thank You: 180wannabe, PaulFH

    Please Log in to join the conversation.

    More
    2 years 3 weeks ago #240906 by myflint69
    Replied by myflint69 on topic Load Binders Dogs
    Finding one to get a photo would hard I reckon, I haven't seen or used one for close to 50 years. Yes, like a lot of old equipment, good for some jobs and no good for others, the Valiant torsion bars with the square cut off one end and ground down a bit were good, also for J loaders in a pan.

    1969 Mack R600.
    1969 C1600 Inter.
    1964 MF 35 Tractor.
    The following user(s) said Thank You: PaulFH

    Please Log in to join the conversation.

    More
    2 years 3 weeks ago #240907 by prodrive
    Replied by prodrive on topic Load Binders Dogs
    Oyster dogs eh? Ask and you shall recieve.... Found these ages ago and thought they were too good to throw away. And now I know that they are called oyster dogs- Bonus!





    Cheers
    Rich
  • The following user(s) said Thank You: Hi Beam, 180wannabe, cobbadog, eerfree, Lang, myflint69, PaulFH, wee-allis, werkhorse, Brocky45 and 1 other people also said thanks.

    Please Log in to join the conversation.

    More
    2 years 3 weeks ago #240908 by Mrsmackpaul
    Replied by Mrsmackpaul on topic Load Binders Dogs
    Didn't know thats what they were called but thats what Im talking Prodrive

    Paul

    Your better to die trying than live on your knees begging
    The following user(s) said Thank You: cobbadog

    Please Log in to join the conversation.

    More
    2 years 3 weeks ago #240910 by prodrive
    Replied by prodrive on topic Load Binders Dogs
    We both learn something Pauly!
    About due for another of your videos soon too eh?
    The following user(s) said Thank You: cobbadog

    Please Log in to join the conversation.

    Time to create page: 0.519 seconds