- Posts: 3
- Thank you received: 0
K2 AUSTIN
13 years 6 months ago - 13 years 6 months ago #36297
by
Replied by on topic Re: K2 AUSTIN
Why can't you repair the one you have? Master and wheel cylinders can be re-sleeved in brass or stainless steel, and it works very successfully.
I'm not sure what the brand of master cylinder is in the K2, none of my Repco-PBR brake part books list a master cylinder part number for that model .. thus indicating it may have been an oddball, or a part that they never supplied, because of its complex design and limited sales market.
I'm not sure what the brand of master cylinder is in the K2, none of my Repco-PBR brake part books list a master cylinder part number for that model .. thus indicating it may have been an oddball, or a part that they never supplied, because of its complex design and limited sales market.
Please Log in to join the conversation.
13 years 5 months ago #36298
by goong
Replied by goong on topic Re: K2 AUSTIN
ONETRACK Thanks for your reply,BUT THE ONE i HAVE IS IN ABOUT 4 PIECES
Please Log in to join the conversation.
13 years 5 months ago #36299
by bel
Replied by bel on topic Re: K2 AUSTIN
I have a master cylinder but it will need to be resleeved so will get a quote for same.
Please Log in to join the conversation.
13 years 5 months ago #36300
by goong
Replied by goong on topic Re: K2 AUSTIN
Hi Bel if the master cylinder you have is the right one ,I can do the resleeving thanks for your reply Goong
Please Log in to join the conversation.
Time to create page: 0.432 seconds