AB110 Distributor settings

Hi,

With my '62 AB110 we had the carby off and cleaned and while it was running better it seemed the Distributor needed adjusting.

I'm running a 245 Straight six (not slant or hemi). I am wondering does anybody know what the Distributor settings should be for this?

As always thank you for your help.

John

I think you would have an AGD 240 or AGD264, check the first part of the engine number.
Ignition timing is listed as 6' before TDC and point gap for Lucas distributor of 14 to 16 thou and 16 to 19 thou if it is a Delco Remy distributor. I prefer to use a dwell meter to get the final setting but I dont have the dwell angle setting listed , someone else may know it.