Skip to main content

Chassis number needed

More
15 years 4 days ago #8689 by muzza
Chassis number needed was created by muzza
Hi Guys
I'm involved in the restoration of a "Grey Ghost" and to make it a little easier to drive we are fitting powersteering, I have most of the parts, however I need a chassis number of a KW with Power assist steering from late 70's as the grey ghost never had P'steer.
as to the grey Ghost
It still has some the grey paint on the chassis showing and after its grey ghosts days it went to TNT alltrans before TAFE purchsed it in 1981 as a apprentice mechanics training unit,a job it has done for the last 28 years.( it is still owned by TAFE) It has all orginal running gear including engine.
Muzza

Please Log in to join the conversation.

15 years 4 days ago #8690 by
Replied by on topic Re: Chassis number needed
What great project sounds like it has done some good in it's life BUT THERE IS ONLY ONE GREY CHOST AND I OWN IT . Dave

Please Log in to join the conversation.

  • Swishy
  • Offline
  • If U don't like my Driving .... well then get off the footpath ...... LOL
More
15 years 4 days ago #8691 by Swishy
Replied by Swishy on topic Re: Chassis number needed

Muzza
GuddayM8

RE: "Grey Ghost"
AKA Silver bullitt
U dont need no power steering
as power steerin iz 4 sissy'z

to make steerin easy on any truck with out power steering or assist
Jack up front axle to get sum daylight under m so the wheeels will turn freely
turn steering full lock
grease king pin s top n bottom
{might as well grease all the rest of the steering while u're @ it)
turn on opposite lock
grease king pin s top n bottom
turn sterring to straight
n lower gently to the ground

n it duz make ahuge difference in the steering

1971 The first "Australian-made" Kenworth - a K125CR is built and delivered. Introduction of W900 and W900S2.

A major milestone was achieved on 2 March 1971 when the first Australian-built Kenworth - a cab-over K125CR - rolled off the production line. That moment marked the transition from merely assembling trucks to building one entirely from component parts.

For memory the 1st Oz built KW'z started with #400000

Cya

[ch9787]

OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST

There's more WORTH in KENWORTH

Please Log in to join the conversation.

More
15 years 2 days ago - 15 years 2 days ago #8692 by Andy Wright
I agree with Dave and the Swish - great project, Muzza. All the best.

Andy&&&&Whatever rubs your buddah.&&&&Got Bedfords? http://bedfordtr
Last edit: 15 years 2 days ago by Andy Wright.

Please Log in to join the conversation.

More
15 years 2 days ago #8693 by muzza
Replied by muzza on topic Re: Chassis number needed

What great project sounds like it has done some good in it's life BUT THERE IS ONLY ONE GREY CHOST AND I OWN IT . Dave


Hey Dave Can i see some photos of your Grey ghost!!, what is your chassis number this one I'm doing is 4015??( i cant remember at home), I cant figure how to upload photos either
Muzza

Please Log in to join the conversation.

More
15 years 1 day ago #8694 by JimmyDodge
Umm...err.. This will be interesting....

Harleigh.

Please Log in to join the conversation.

  • Swishy
  • Offline
  • If U don't like my Driving .... well then get off the footpath ...... LOL
More
15 years 1 day ago #8695 by Swishy
Replied by Swishy on topic Re: Chassis number needed

OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST

There's more WORTH in KENWORTH

Please Log in to join the conversation.

More
15 years 1 day ago #8696 by Andy Wright
That's not an animation either, Muzza, she does actually do that when you see her in the flesh...

Andy&&&&Whatever rubs your buddah.&&&&Got Bedfords? http://bedfordtr

Please Log in to join the conversation.

More
14 years 11 months ago #8697 by podge66
Replied by podge66 on topic Re: Chassis number needed
:P Hi Muzza why do you want another chassis number, the number you have dosen't make any difference for rego or RWC. The only difference is to the wankers at the red bug part shop because they cant give you a blinker globe with out a chassis number. Powersteering or manual wont make any difference to the chassis number. Podge ::)

Please Log in to join the conversation.

More
14 years 11 months ago #8698 by muzza
Replied by muzza on topic Re: Chassis number needed

:P Hi Muzza why do you want another chassis number, the number you have dosen't make any difference for rego or RWC.

I needed the chassis number so I can get parts from kenworth, I have found one and ordered the last part I need to add the Garrsion power assist cylinders.
Thanks

Please Log in to join the conversation.

Time to create page: 0.453 seconds