Skip to main content

Mack axles

More
7 years 1 month ago #181287 by d23j
Mack axles was created by d23j
I have picked up a 58,000lb Mack diff centre and the axles are larger! I wonder if anyone has information on fitting one to 44,000lb housing? Regards Andrew

Please Log in to join the conversation.

  • BillyP
  • Offline
  • I wish i could remember all the things i have forgotten...
More
7 years 1 month ago - 7 years 1 month ago #181291 by BillyP
Replied by BillyP on topic Mack axles

,Andrew............

....................................I don't know much about Macks........But
I would think you would have to be pretty lucky for a 58 centre to fit in a 44 housing..........
Or bits there off........................
but stranger things have happened I suppose........................
............................Billy............................

I CAME INTO THIS WORLD WITH NOTHING & STILL HAVE MOST OF IT.........................

I used to be a truck driver,
but i am now not a truck driver ,
on a good day i can remember
that i used to be a truck driver.
Last edit: 7 years 1 month ago by BillyP.

Please Log in to join the conversation.

More
7 years 1 month ago #181388 by JOHN.K.
Replied by JOHN.K. on topic Mack axles
In the old double reduction diffs there were basically three sizes,the CRD95/96 which was a ginormous,offroad type,the CRD92/93 which had 2.24"sidegear splines,and the higher capacity,but same gears and housing CRD112/113 with 2.42"sidegear splines.The capacity figures were generally dreamed up by wreckers selling bits.Regards John.

Please Log in to join the conversation.

Time to create page: 0.347 seconds