- Posts: 1324
- Thank you received: 674
Inline VS Bent engines
2 years 2 months ago #231755
by Zuffen
Replied by Zuffen on topic Inline VS Bent engines
If Millyard built it it isn't a real KH500.
The badge is telling stories.
The badge is telling stories.
Please Log in to join the conversation.
2 years 2 months ago #231785
by Morris
I have my shoulder to the wheel,
my nose to the grindstone,
I've put my best foot forward,
I've put my back into it,
I'm gritting my teeth,
Now I find I can't do any work in this position!
Replied by Morris on topic Inline VS Bent engines
Grandad how would they bore and hone the cylinders?
I have my shoulder to the wheel,
my nose to the grindstone,
I've put my best foot forward,
I've put my back into it,
I'm gritting my teeth,
Now I find I can't do any work in this position!
Please Log in to join the conversation.
2 years 2 months ago #231791
by hayseed
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Inline VS Bent engines
Is That a Ford Transit Boat Anchor...??
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
2 years 2 months ago #231793
by geoffb
Replied by geoffb on topic Inline VS Bent engines
With some limited very limited experience odd numbers of cylinders seem to balance out very well as there is no directly force opposing As is this why radial engines are odd numbers even 18 cyclinder radial is 2 banks of 9 But I sure someone here can enlighten me
The following user(s) said Thank You: PaulFH
Please Log in to join the conversation.
2 years 2 months ago #231795
by roKWiz
Yes Hayseed Essex V4.
Acquired to use as a small coffee table, gearbox has already been put to good use as a birdbath.
Heritage Stonemason
In order that the labour of centuries past may not be in vain during the centuries to come... D. Did
Replied by roKWiz on topic Inline VS Bent engines
Is That a Ford Transit Boat Anchor...??
Yes Hayseed Essex V4.
Acquired to use as a small coffee table, gearbox has already been put to good use as a birdbath.
Heritage Stonemason
In order that the labour of centuries past may not be in vain during the centuries to come... D. Did
Please Log in to join the conversation.
2 years 2 months ago #231797
by Lang
Replied by Lang on topic Inline VS Bent engines
Geoff
Radial engines are different from horizontal engines in the crank system is entirely different. Here is what WIKI has to say about it.
en.wikipedia.org/wiki/Radial_engine#:~:t...ion%20more%20uniform .
Radial engines are different from horizontal engines in the crank system is entirely different. Here is what WIKI has to say about it.
en.wikipedia.org/wiki/Radial_engine#:~:t...ion%20more%20uniform .
The following user(s) said Thank You: PaulFH
Please Log in to join the conversation.
2 years 2 months ago #231800
by geoffb
Replied by geoffb on topic Inline VS Bent engines
I understand that Lang and there is a good video of one being assembled from a exploded drawing and gives a go insight all the components
The following user(s) said Thank You: PaulFH
Please Log in to join the conversation.
2 years 2 months ago #231805
by hayseed
It'd make a far better Boat anchor than a Coffee Table, (In My Opinion) I don't have a very High Opinion of those V4 (under)Powered Transit Vans..
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Inline VS Bent engines
Is That a Ford Transit Boat Anchor...??
Yes Hayseed Essex V4.
Acquired to use as a small coffee table
It'd make a far better Boat anchor than a Coffee Table, (In My Opinion) I don't have a very High Opinion of those V4 (under)Powered Transit Vans..
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
Time to create page: 0.560 seconds