Skip to main content

chamberlain 3-71 hydraulics

More
12 years 11 months ago - 12 years 11 months ago #51612 by Mike Moore
chamberlain 3-71 hydraulics was created by Mike Moore
i am after the set up for hydraulics to fit on my chamberlain, looks like this

[IMG


if anyone knows about one of these that aren't used let me know,
cheers mike
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Last edit: 12 years 11 months ago by Mike Moore.

Please Log in to join the conversation.

More
12 years 11 months ago #51613 by ozfarm
Replied by ozfarm on topic Re: chamberlain 3-71 hydraulics
ring around the wreckers

same hyd as 306,354,c670,c6100

Please Log in to join the conversation.

More
12 years 11 months ago - 12 years 11 months ago #51614 by Chocs
Replied by Chocs on topic Re: chamberlain 3-71 hydraulics
reckon i have seen a similar gadget on some older headers??
Ill keep an eye open for ya

edit: would i be right in thinking they were belt driven under the engine on some of them??
I am sure i took a setup off a header some time ago, perkins 6354

Please Log in to join the conversation.

More
12 years 11 months ago #51615 by Mike Moore
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
oh righto, now ive got a better variety of models it should make it easier to find, thanks for that
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&

Please Log in to join the conversation.

More
12 years 11 months ago - 12 years 11 months ago #51616 by q4016lanz
Replied by q4016lanz on topic Re: chamberlain 3-71 hydraulics
Hi try mick beer machinery via maryborgh vic. not far from you. my old stamping ground many years ago cheers john ;D ;D
Last edit: 12 years 11 months ago by q4016lanz.

Please Log in to join the conversation.

More
12 years 11 months ago #51617 by Mike Moore
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
im not exactly sure how they are opperated, but to be honest anything that will look neat is good enough for me.
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&

Please Log in to join the conversation.

More
12 years 11 months ago #51618 by Chocs
Replied by Chocs on topic Re: chamberlain 3-71 hydraulics
Got 2/3's of a feelin the green one is still here also one off a allis header, i'll try a look in the morning..get my number off scrawny if ya like..

Please Log in to join the conversation.

More
12 years 11 months ago #51619 by Mike Moore
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
yep righto chocs, thanks for that
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&

Please Log in to join the conversation.

More
12 years 11 months ago #51620 by Chocs
Replied by Chocs on topic Re: chamberlain 3-71 hydraulics
k mate
just checked stock!
the green one which i thought was off a header / perkins
was a separate belt drive pump, separate reservoir, separate controls.
Control went on a wood splitter,
The other unit is now on a transfer conveyer on a firewood mill
but i will keep an eye out all the same

Please Log in to join the conversation.

More
12 years 11 months ago #51621 by Mike Moore
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
righto, not a problem
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&

Please Log in to join the conversation.

Time to create page: 0.525 seconds