- Posts: 135
- Thank you received: 0
chamberlain 3-71 hydraulics
- Mike Moore
- Topic Author
- Offline
Less
More
12 years 11 months ago - 12 years 11 months ago #51612
by Mike Moore
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
chamberlain 3-71 hydraulics was created by Mike Moore
i am after the set up for hydraulics to fit on my chamberlain, looks like this
if anyone knows about one of these that aren't used let me know,
cheers mike
if anyone knows about one of these that aren't used let me know,
cheers mike
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Last edit: 12 years 11 months ago by Mike Moore.
Please Log in to join the conversation.
12 years 11 months ago #51613
by ozfarm
Replied by ozfarm on topic Re: chamberlain 3-71 hydraulics
ring around the wreckers
same hyd as 306,354,c670,c6100
same hyd as 306,354,c670,c6100
Please Log in to join the conversation.
12 years 11 months ago - 12 years 11 months ago #51614
by Chocs
Replied by Chocs on topic Re: chamberlain 3-71 hydraulics
reckon i have seen a similar gadget on some older headers??
Ill keep an eye open for ya
edit: would i be right in thinking they were belt driven under the engine on some of them??
I am sure i took a setup off a header some time ago, perkins 6354
Ill keep an eye open for ya
edit: would i be right in thinking they were belt driven under the engine on some of them??
I am sure i took a setup off a header some time ago, perkins 6354
Please Log in to join the conversation.
- Mike Moore
- Topic Author
- Offline
Less
More
- Posts: 135
- Thank you received: 0
12 years 11 months ago #51615
by Mike Moore
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
oh righto, now ive got a better variety of models it should make it easier to find, thanks for that
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Please Log in to join the conversation.
12 years 11 months ago - 12 years 11 months ago #51616
by q4016lanz
Replied by q4016lanz on topic Re: chamberlain 3-71 hydraulics
Hi try mick beer machinery via maryborgh vic. not far from you. my old stamping ground many years ago cheers john
Last edit: 12 years 11 months ago by q4016lanz.
Please Log in to join the conversation.
- Mike Moore
- Topic Author
- Offline
Less
More
- Posts: 135
- Thank you received: 0
12 years 11 months ago #51617
by Mike Moore
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
im not exactly sure how they are opperated, but to be honest anything that will look neat is good enough for me.
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Please Log in to join the conversation.
12 years 11 months ago #51618
by Chocs
Replied by Chocs on topic Re: chamberlain 3-71 hydraulics
Got 2/3's of a feelin the green one is still here also one off a allis header, i'll try a look in the morning..get my number off scrawny if ya like..
Please Log in to join the conversation.
- Mike Moore
- Topic Author
- Offline
Less
More
- Posts: 135
- Thank you received: 0
12 years 11 months ago #51619
by Mike Moore
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
yep righto chocs, thanks for that
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Please Log in to join the conversation.
12 years 11 months ago #51620
by Chocs
Replied by Chocs on topic Re: chamberlain 3-71 hydraulics
k mate
just checked stock!
the green one which i thought was off a header / perkins
was a separate belt drive pump, separate reservoir, separate controls.
Control went on a wood splitter,
The other unit is now on a transfer conveyer on a firewood mill
but i will keep an eye out all the same
just checked stock!
the green one which i thought was off a header / perkins
was a separate belt drive pump, separate reservoir, separate controls.
Control went on a wood splitter,
The other unit is now on a transfer conveyer on a firewood mill
but i will keep an eye out all the same
Please Log in to join the conversation.
- Mike Moore
- Topic Author
- Offline
Less
More
- Posts: 135
- Thank you received: 0
12 years 11 months ago #51621
by Mike Moore
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Replied by Mike Moore on topic Re: chamberlain 3-71 hydraulics
righto, not a problem
1971 International ACCO &&1971 International 564 &&196? Nuffield BMC mini &&
Please Log in to join the conversation.
Time to create page: 0.452 seconds