Vintage wheel puller needed

Does anyone have one of these or know where i could get one.

3 different internal threads needed, I need the first 2 for my SL-34 International & PhilD needs the 3rd one for his Six Speed Special

3 & 3/4" x 16 TPI
3" x 16 TPI
2 & 11/16" x 16 TPI

Second picture does not show it properly but it is threaded internally.



Trevor

G'day Trevor,
If you really get stuck I could machine them up for you.

Stu

Thats what i was thinking might need to happen, i know Phil needs his straight away and as i am looking at pulling wheels off in about 2-3 weeks time i will need them 2.
If i dont find anyone who has got one then i will let you know.

Trevor

Trevor ,

I saw one of them pullers at Kurri it was been sold by Tony Petch who writres a few stories for Vintage Commericals Mag (TOMM). Dave

Dave

Thanks for that got your message and will try and ring.

Trevor

I have a box of them so will have a look over the weekend if thats not too late for you

cheers

Chester

Chester

That would be great.

The one i am chasing is the 3" X 16TPI one.

PhilD needs the 2 & 11/16" X 16 TPI.

The 3 & 3/4" one is no longer needed.

Trevor

G'day Trevor,
If you really get stuck I could machine them up for you.

Stu
As i have had no luck in finding one if i draw it up for you could you make one up.
This is the wheel that needs the puller


Trevor

Water pipe collar no good trev?
I haven't put a thread guage in one yet....just a thought.
I will have a look though the gadget box this morning and see if there is a good start of one there..
Might save Stuey gettin too much enjoyment on the lathe!
chocs

Chocs

It is a very fine thread for the diameter.
3" OD X 16 tpi
I have even tried to get a nut from my local nut & bolt place. I think it going to give Stu some enjoyment.

Trevor