Feedback on the new look site

Terry,
I am using a desktop computer.
I login from a box top right hand side and tick remember me.
Malware bytes does not like the login at the bottom left hand side
Bob.
 

I haven't used the login at the bottom of the page as I never noticed it until your post, always ticked the keep logged in. I log in with a desktop.
Next time I log in I will use the one at the bottom of the page.
Thank you.

Hi,

there is an issue with the Remember Me in the top right that the people who write the Forum software need to fix, interim solution I wrote abut last week is here,

www.hcvc.com.au/forum/forum-q-s-a-s/2125...ing-interim-solution

Terry

Slightly off topic, but all of a sudden i have had to get rid of the "/unread" from the address of this thread, to be able to see this thread again, and not just get a blank screen.

Brett.

Hi,

I had to remove that '/unread' for the URL/Address to see the Vintage Roller thread also however I haven't been able to work out the pattern or cause as to why two threads now have had the '/unread' not automatically removed when the page loads.

Any topic link under Forum Latest that has the number of New posts(shown in green) marked against it will show the link with '/unread' at the end of it, however once you load the page the '/unread' is normally stripped away as it is no longer required but if it stays there then you get a mostly blank page.

Terry

After a couple of goes, trying what people suggested, I finally stopped the emails about a week ago but for the last couple of days, I have had to sign in every time, despite clicking the "Remember me" box

It is a pain not being able to scroll back and see other people's messages when you are writing. I often had to go back to get people's names right.

Unable to view the 2 latest posts on Frauline Friday.
Tap on it, starts to open then returns to list.
Otherwise finding the new format good to operate.
Probably an easy fix, thank you.

I also have threads come up blank page. Fraulein Friday and the Roller thread thread for example.

Lang, when you strike a thread that comes up as a blank page, look at the address in the address bar at the very top of the page.  If the address ends with " /unread ", move your cursor up there, and delete the " /unread " off the end of the address, and that should fix it.

It has worked for me on several threads now.

Brett.

That worked!