- Posts: 1517
- Thank you received: 1543
Fill's Bedford
6 years 3 weeks ago #192598
by wee-allis
Replied by wee-allis on topic Fill's Bedford
Fill, If you made them like PDU suggested, you would have to place a "LEFT TURN ONLY" sign at the top along with a "STOP" sign for when going up and a "RIGHT TURN ONLY" sign for coming down. Steve.
The following user(s) said Thank You: Southbound
Please Log in to join the conversation.
6 years 3 weeks ago #192602
by Morris
I have my shoulder to the wheel,
my nose to the grindstone,
I've put my best foot forward,
I've put my back into it,
I'm gritting my teeth,
Now I find I can't do any work in this position!
Replied by Morris on topic Fill's Bedford
AND you would have to have double white lines down the centre and wackers in Hi-Viz jackets standing holding "Slow" signs?
Ps. Yes I do know which side my bread is buttered, it is the side that hits the carpet!
Ps. Yes I do know which side my bread is buttered, it is the side that hits the carpet!
I have my shoulder to the wheel,
my nose to the grindstone,
I've put my best foot forward,
I've put my back into it,
I'm gritting my teeth,
Now I find I can't do any work in this position!
The following user(s) said Thank You: Southbound
Please Log in to join the conversation.
6 years 3 weeks ago - 6 years 3 weeks ago #192610
by Fill
Replied by Fill on topic Fill's Bedford
I saw this at a truck show. Very Very expensive. and a lot heaver than mine, but very cleaver. As I said all comments are good cheers Fill
30074246_2034291166894886_178107202_o (1)
by
fill quinn
, on Flickr
Last edit: 6 years 3 weeks ago by Fill. Reason: adding a bit more
Please Log in to join the conversation.
Less
More
- Posts: 1300
- Thank you received: 1174
6 years 3 weeks ago #192639
by Southbound
I'd rather have tools that I don't need, than not have the tools I do need.
Replied by Southbound on topic Fill's Bedford
Great pic Fill, looks like you're living the dream. Gunna have to advise you of about 100 safety defects going on there!!! :pinch:
I'd rather have tools that I don't need, than not have the tools I do need.
Please Log in to join the conversation.
6 years 3 weeks ago #192645
by PaulFH
Replied by PaulFH on topic Fill's Bedford
No worries, risk areas clearly marked with approved gold & brown bottles.
Lots of hard work done there. Paul.
Lots of hard work done there. Paul.
Please Log in to join the conversation.
6 years 2 weeks ago #192701
by Fill
Replied by Fill on topic Fill's Bedford
Thanks PaulFH and Southbound I like to get replies. I am getting ready for wiring. Stainless steel off cut from mud guards. holds number plate, ( not a real one) number plate light and trailer plug. sorry if a bit boring. Cheers Fill
100_3248
by
fill quinn
, on Flickr
Please Log in to join the conversation.
Less
More
- Posts: 560
- Thank you received: 1119
6 years 2 weeks ago #192704
by oliver1950
You can't have too many toys!
Replied by oliver1950 on topic Fill's Bedford
Never boring,keep it up.
You can't have too many toys!
Please Log in to join the conversation.
6 years 2 weeks ago #192706
by JOHN.K.
Replied by JOHN.K. on topic Fill's Bedford
I found an old set of ally swimming pool steps in the scrap.......very light,and make getting on tray easy.......but in my case,its not getting up,its the shock on my knees getting down.....even off the back of the ute is painful....Maybe Ive jumped down too many times in the past.
Please Log in to join the conversation.
Time to create page: 0.568 seconds