Updated 28th July.

If you are unable to login, you probably need to read this change to your username & profile.

 

Welcome, Guest
Username: Password: Remember me

TOPIC:

Another Bedford 16 Oct 2021 14:07 #226781

  • Colin HD
  • Colin HD's Avatar Topic Author
  • Offline
  • Posts: 152
  • Thank you received: 290
Fresh pair of plates cut, 6mm.

Attachments:

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 15:10 #226784

  • Colin HD
  • Colin HD's Avatar Topic Author
  • Offline
  • Posts: 152
  • Thank you received: 290
One in, one to go.



Attachments:
The following user(s) said Thank You: cobbadog, PaulFH, Tassie Dan

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 16:14 #226787

  • Vic Rhodes
  • Vic Rhodes's Avatar
  • Offline
  • Posts: 99
  • Thank you received: 34
Looks Good.

Bit hard to tell from Your Pictures. But are you using Hardened Washers & Locknuts...??
The following user(s) said Thank You: Colin HD

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 18:15 #226793

  • Colin HD
  • Colin HD's Avatar Topic Author
  • Offline
  • Posts: 152
  • Thank you received: 290

Looks Good.

Bit hard to tell from Your Pictures. But are you using Hardened Washers & Locknuts...??


Cheers Vic.

Yes with the washers, but no with the locknuts.

Well not at the moment, I thought I had some, but do you think I can find them!.

Get some more tomorrow, hopefully at the Kalbar QLD Swap Meet.

Both plates in.



Attachments:
The following user(s) said Thank You: cobbadog, PaulFH

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 21:31 #226806

  • cobbadog
  • cobbadog's Avatar
  • Offline
  • Posts: 2928
  • Thank you received: 1462
Looks Good Collin, nice work.
Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe.
STUBBOURN B@ST@RD
The following user(s) said Thank You: Colin HD

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 21:47 #226809

  • Colin HD
  • Colin HD's Avatar Topic Author
  • Offline
  • Posts: 152
  • Thank you received: 290

Looks Good Collin, nice work.


Cheers Cobbadog, slowly getting there, one piece at a time.
,

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 21:53 #226812

  • Mrsmackpaul
  • Mrsmackpaul's Avatar
  • Offline
  • Posts: 5549
  • Thank you received: 2249
All is good in Bedford land, should be right for a few years now
Only I would do different is paint it before I put it in to stop it rusting again

Paul
Your better to die trying than live on your knees begging
The following user(s) said Thank You: cobbadog

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 21:58 #226814

  • cobbadog
  • cobbadog's Avatar
  • Offline
  • Posts: 2928
  • Thank you received: 1462
It's a trial fit 1st Paul, then removal, pain t and refit. :P
Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe.
STUBBOURN B@ST@RD

Please Log in to join the conversation.

Another Bedford 16 Oct 2021 22:06 #226818

  • Colin HD
  • Colin HD's Avatar Topic Author
  • Offline
  • Posts: 152
  • Thank you received: 290
Cheers guys, the intention is to strip it down when I paint the chassis.
Will get smothered in POR15 then.
The following user(s) said Thank You: cobbadog

Please Log in to join the conversation.

Another Bedford 17 Oct 2021 07:32 #226832

  • mammoth
  • mammoth's Avatar
  • Offline
  • Posts: 2804
  • Thank you received: 455
Maybe use nyloc nuts rather that locknuts?

Please Log in to join the conversation.

Time to create page: 0.577 seconds

Historic Commercial Vehicles Club of Australia Inc.  Post: P.O. Box 2020 Bayswater Vic. 3153    Clubrooms: Unit 8 / 4  Macquarie Place Boronia    Club Phone: 0400 025 525    Club Rooms:  03) 9738 1558