- Posts: 1731
- Thank you received: 1780
Bedford wheel/rim sizes
3 years 9 months ago #211065
by PDU
Replied by PDU on topic Bedford wheel/rim sizes
Just thinking sideways for a moment . . . :oops:
Please Log in to join the conversation.
3 years 9 months ago #211069
by Dave_64
Replied by Dave_64 on topic Bedford wheel/rim sizes
Outside the box?
I like that!
I like that!
Please Log in to join the conversation.
3 years 9 months ago #211095
by jon_d
Replied by jon_d on topic Bedford wheel/rim sizes
Please Log in to join the conversation.
3 years 9 months ago #211098
by Dave_64
Replied by Dave_64 on topic Bedford wheel/rim sizes
jon_d,
Wrong profile, they are for the smaller single wheel Bedsteads, no offset.
But thanks anyway, Dave
Wrong profile, they are for the smaller single wheel Bedsteads, no offset.
But thanks anyway, Dave
Please Log in to join the conversation.
3 years 9 months ago #211100
by jon_d
Replied by jon_d on topic Bedford wheel/rim sizes
Would the hub hole be the same to get a measurement?.... (or is that not needed now?) I'm getting lost in this thread!!
Please Log in to join the conversation.
3 years 9 months ago #211101
by Dave_64
Replied by Dave_64 on topic Bedford wheel/rim sizes
According to the link put up on the previous page, it iz saying the bore diameter is 101 mm, ones I need are bore diameter of 106.7 mm. Again, going by the same link, only ones suitable that Bedford have is off the TJSeries, J3 model rear dual . They have a 105 or 106mm centrebore.
Please Log in to join the conversation.
3 years 9 months ago - 3 years 9 months ago #211106
by PDU
Replied by PDU on topic Bedford wheel/rim sizes
While I'm in Adelaide next week I plan to call in on the guy who ended up with my J series Bedford (that donated B for's replacement engine).He wrecks Bedfords and send parts to South Africa, if you like I can check what he has laying around ???
How many 105/106mm centre bore wheels do you want, and would you like me to follow it up for you?
How many 105/106mm centre bore wheels do you want, and would you like me to follow it up for you?
Last edit: 3 years 9 months ago by PDU.
Please Log in to join the conversation.
3 years 9 months ago #211109
by Dave_64
Replied by Dave_64 on topic Bedford wheel/rim sizes
PDU, Thanks, P/M sent
Please Log in to join the conversation.
3 years 9 months ago #211144
by Dave_64
Replied by Dave_64 on topic Bedford wheel/rim sizes
Mammoth, just had a squiz at 'em!
Law of averages says that there would almost sure to be one or two there.
However, PDU has taken up the pursuit!
He's got a mate who's a Bedstead wrecker in Adelaide. he's going down there next week, I think he said.
Armed him with all the sizes and he is gonna check it out for me.
Thanks, Dave
Law of averages says that there would almost sure to be one or two there.
However, PDU has taken up the pursuit!
He's got a mate who's a Bedstead wrecker in Adelaide. he's going down there next week, I think he said.
Armed him with all the sizes and he is gonna check it out for me.
Thanks, Dave
Please Log in to join the conversation.
Time to create page: 0.555 seconds